Headsets

A headset for every seat.

The CommVoy Unit takes the off-road intercom headsets riders already use: the common 5-pin plug and wiring. The CommVoy wireless pack, in design, cuts the cord on any of them.

Render of the CommVoy wireless headset pack: a small black case with a button, a green status light, an amber CommVoy mark and a short lead ending in a 5-pin connector.

Wired headsets

The 5-pin standard.

The unit's four headset sockets follow the common 5-pin off-road intercom wiring, the same pinout Rugged Radios publishes for its headsets. Standard 5-pin off-road headsets and helmet kits that use this wiring work, generic ones included.

1 2 3 4 5
5-pin socket, pin numbers. Pin positions are drawn for illustration; the numbering is what matters.
PinSignal
1Mic − / ground
2Push-to-talk (driver and co-driver seats)
3Mic +
4Speaker +
5Speaker −
  • Dynamic or electret mic: choose per seat in the settings, no soldering.
  • A push-to-talk button on the driver's or co-driver's headset cable keys the radio.
  • Rear-seat headsets plug in the same way and stay on the intercom.
  • Wire colours differ between makers: check pin numbers, not colours.

CommVoy headsets Planned

Headsets to go with the unit.

We plan to offer 5-pin headsets matched to the unit. Tell us what you ride and what you wear (over-the-ear or helmet kits) and we will let you know.

Get notified

CommVoy wireless headset pack In design

Any seat, wireless.

A small battery pack that sits on the outside of your wired headset and plugs into its 5-pin plug. The unit talks to it by radio.

Design targets, not measured on a built pack
SizeAbout 74 × 46 × 21 mm
Weight as wornAbout 60 g, estimated
Battery1000 mAh lithium cell, about 9 hours of use (estimate from part datasheets)
CasePrinted nylon with a sealing gasket and a plug over the USB-C port. Not waterproof
LinkEncrypted 2.4 GHz radio link to the unit

Get notified about the pack

Headset questions

Will my headsets work?

If they have the common 5-pin off-road intercom plug, they are what the unit is designed for. The settings let you match dynamic or electret mics and set the level for each seat.

Rugged Radios, PCI or generic headsets?

The sockets are wired to the 5-pin pinout Rugged Radios publishes, so headsets built to it, from Rugged Radios or generic makers, are what the unit is designed for. PCI does not publish its headset pinout, so we have not confirmed it yet; we will check PCI headsets on the bench before the unit is offered.

Do I need the wireless pack?

No. Wired headsets plug straight into the unit. The pack is for seats where a cord gets in the way.

When will the pack be available?

It is in design and has not been built yet, so there is no date. Get notified.

Can I mix wired and wireless seats?

The design allows it: each seat is either plugged into the unit or on a pack.

Be first in line.

The CommVoy Unit is in development. Join the early list and we will tell you when units, wireless packs and headsets are ready. Joining is free and commits you to nothing: no order, no payment.

Opens an email to [email protected] with a short form: your vehicle, seats, headsets and radio.